Jalousie
Angled louvre slats. You see out, the street can barely see in — privacy without boxing the garden in.
- C-profile, 40 or 60 mm
- Panels up to 3 m
- Matt polyester finish
from €125 per m²
THE FULL RANGE
Everything we make, with prices
Every fence, gate and panel swap in the F&G range. All of it galvanized steel, factory coated in your colour, made to your measurements and installed by our own crew.
Prices below are guide prices for supply and installation. Fences are per square metre, gates and panel swaps are per unit. Your own quote is fixed and in writing before we order a single panel.
FENCES
Steel fencing, six profiles
The same build every time: galvanized steel boards or slats between posts, coated at the factory in your colour, panels up to 3 metres. What changes is the profile — how private it is, and how it looks from the street.
MOST POPULAR
Rhombus
Every slat folded into a closed diamond tube, so no raw steel edge shows. About twice as stiff as a standard slat — and our most popular fence.
- Closed tube, 60 or 80 mm
- 2× the stiffness
- The luxury look of the range
from €120 per m²
Horizontal
Boards running level on vertical U-profiles. One-sided with gaps, or double-sided and completely closed.
- ALUZINC coated boards
- A colour per side available
- Segments up to 3.5 m
from €120 per m²
Vertical
The classic timber picket look in steel. Partly open with gaps, or double-sided chess for full privacy.
- Seven board cuts to choose
- ALUZINC coated boards
- A colour per side available
from €110 per m²
Pine
The tree-shaped profile looks identical from both sides, so it keeps both neighbours happy on a boundary. The most private profile we make.
- Same face both sides
- 60 mm profile
- Least see-through in the range
price on request
Classic bar
20 × 20 steel tubes welded through the centre of a U-tray, so it reads the same from both sides. Sealed tube tops keep water out.
- Gaps 80 or 100 mm
- Compact 40 mm version
- Galvanized + powder coated
from €135 per m²
BOARD CUTS
Seven board profiles, one fence
The vertical fence is built from steel boards, and the boards come in seven cuts. Same fence, same price bracket — it is purely the shape you prefer.
FOR HOUSING ESTATES
Got concrete posts? This is the easy one
If your garden already has concrete posts, the posts are usually grand. It is the timber between them that sags, rots at the base and needs staining every couple of years. We pull the timber out and fit steel boards straight into the same posts. No digging, no concrete, no new posts, and most gardens are finished in a day.
NO DIGGING
Before
After
The same garden and the same concrete posts, shot in winter and again after fitting. Drag to compare.
Estate panel swap
Steel boards drilled and anchored into your existing concrete posts, boarded on both sides so it is closed from the street. Each face can be its own colour, so neighbours split the cost and pick a colour a side.
1 daymost estate gardens, start to finish
€120per panel, supplied and fitted
2 coloursone for your side, one for theirs
0 diggingyour existing posts stay put
from €120 per panel, fitted
GATES
Gates, matched to your fence
Every gate is welded to your opening and filled with the same profile as your fence, so the entrance reads as one piece. Prices are for the gate supplied and installed; automation is quoted on top.
Sliding gates
Runs along the fence line on sealed-bearing trolleys. Nothing swings into the drive, nothing drags on the ground — the answer for slopes and tight entrances.
- 60 × 40 / 60 × 60 frame
- Automation rack welded on
- Any filler in the range
from €2,400 supplied & installed
Swing gates
The traditional double gate. Simpler than a sliding gate and a lower price for the same opening, with a recessed lockable option.
- 60 × 40 square tube frame
- Adjustable galvanized hinges
- Ground pins + padlock loops
from €1,900 supplied & installed
Side gates
A matching pedestrian gate made with the same filler and colour as the main gate, so the whole entrance reads as one piece. Lockable, with a post box built in if you want one.
- Made to your opening
- Filler matched to the fence
- Post box option
quoted with your gate or fence
AUTOMATION & EXTRAS
The bits that go with it
Gate automation
A brushless motor kit with two remote controls, safety photocells and a warning lamp. Fitted with a new gate, or retrofitted — our gates leave the factory with the rack already welded on.
- Brushless motor kit
- 2 remotes + photocells
- Keypad entry option
quoted with your gate
Infill panels for walls & pillars
Built a rendered wall or pillars already? We make slat panels to drop into the openings in any profile and colour from the range.
- Made to the opening
- Any profile in the range
- Fits render, block or brick
quoted per opening
Supply-only kits
Fitting it yourself? We supply any fence in the range as a kit — profiles cut to your measurements, posts, crossbars, rivets and screws, all coated in your colour.
- Cut to your measurements
- Posts, rivets and fittings included
- Delivered to you
price on request
EVERY PRODUCT, ANY COLOUR
Twelve colours, matt or gloss
Anything on this page is made in the house colours — anthracite, graphite, chocolate brown and jet black — plus wood imitation finishes, and the full RAL index made to order. Most colours come in matt or gloss.
The same fence, on a real jobJalousie in graphite, fitted by our crew →
Before you compare prices
- Guide prices, not quotes. The figures above are what these jobs usually land at, supplied and installed. Access, ground, slope and the number of posts all move it. Your written quote is fixed.
- Made to order. Nothing here sits in a warehouse. Your fence is cut and painted to your colour at the factory, so allow 3 to 4 weeks from booking to fitting day.
- Supply and install as standard. Prices include our crew fitting it. Supply-only is available on any product if you would rather fit it yourself.
Seen what you want?
Tell us the product and a rough length and we price it. No visit, no obligation.